Poly Foam Lifting in Jackson MS - Fixing Sunken Driveways Without Replacement

You've noticed that gap between your driveway and garage floor for a while now. The way rainwater pools in one corner. Maybe you've even tripped on that uneven section. Your driveway seems to be sinking, and you're dreading what comes next—because replacing a driveway sounds expensive and like a huge headache.

Here's the good news: you probably don't need to replace it. Poly foam lifting in Jackson MS can fix your sunken driveway in a few hours for a fraction of replacement cost, with minimal disruption to your life.

What Is Poly Foam Lifting?

Poly foam lifting (also called polyjacking) lifts settled concrete back to level using expanding polyurethane foam. It's a high-tech way to fill voids under your driveway and raise it without ripping anything out.

The process involves a technician drilling small dime-sized holes into the sunken sections. Then they inject a two-part polyurethane foam underneath. The foam expands to 30-40 times its original size, filling gaps and gently pushing the concrete slab upward until it's level. Within 15 minutes, the foam hardens into a solid, waterproof support strong enough to hold your cars for decades.

The entire process takes just a couple hours, allowing you to drive on it the same day.

Why Do Driveways Sink?

In Jackson, clay soil expands when wet and contracts when dry. This constant movement creates voids under your concrete. Water runoff also washes away soil, leaving empty spaces. Eventually, the concrete settles into these voids.

You might also notice this happens more on one side of your driveway than the other, or near where downspouts drain. That's because the settling follows the water. Wherever moisture accumulates, the more the soil shifts. Heavy vehicles driving over weak spots can also speed up the process, compressing the soil underneath until there's nothing left to support the weight.

The good news? This is fixable without tearing everything out.

Poly Foam Lifting vs. Replacing Your Driveway

Replacing your driveway is a long and expensive process. Tearing out concrete, hauling it away, re-grading, pouring new concrete, waiting days for it to cure, and dealing with restricted garage access for at least a week. And the cost? Most Jackson replacements run $4,000 to $10,000+.

Poly foam lifting is completely different. Most residential projects cost $1,200 to $3,500—roughly half the price. Work takes 2-4 hours instead of days. You can use your driveway within an hour. No heavy equipment tears up your yard.

Plus, poly foam actually addresses the problem permanently with material that won't erode or break down.

What to Expect During the Process

First, a technician assesses your driveway to determine where settling has occurred and how much lift is needed. They mark strategic injection points for even lifting.

Next, they drill small 5/8-inch holes into the concrete—way smaller than the 1.5 to 2-inch holes required for old mudjacking, and much less noticeable once patched.

Then comes the lifting. Polyurethane foam is injected, and you can watch your driveway rise back into place. The technician monitors the process carefully to ensure even, precise lifting.

Once level, they remove the injection ports and patch the holes with color-matched concrete. The foam cures in 15 minutes, creating a solid, waterproof base.

That's it. Most homeowners are amazed at how simple and non-disruptive it is.

How Long Does Poly Foam Lifting Last?

When done properly, poly foam lifting can last for the life of your concrete.

The polyurethane foam is incredibly durable. It weighs only 2-4 pounds per cubic foot (versus 100+ pounds for old mud slurry), so it doesn't stress unstable soil. It's hydrophobic—repelling water instead of absorbing it—so it won't wash away. And it supports 4,000+ pounds per square foot, more than enough for residential driveways.

The key is working with an experienced contractor like Foremost Foundations and Construction. We have a firm understanding of Jackson's soil conditions and we have expertise in proper injection techniques.

Is Poly Foam Lifting Right for Your Driveway?

Poly foam lifting works great for driveways that have settled or sunk but are still in generally good condition. If your concrete is extensively cracked, crumbling, or structurally compromised in multiple places, replacement might still be your best option.

But for most sunken driveways in Jackson MS, poly foam lifting is the faster, more affordable, and less disruptive solution that gets the job done right.

Schedule a Professional Inspection

If you're dealing with a sunken driveway, get a professional assessment. A qualified poly foam lifting contractor can evaluate your situation, show you what areas need lifting, and give you a clear estimate.

Don't put it off. The longer you wait, the worse settling gets—and the more expensive the fix becomes. Plus, uneven concrete is a safety hazard. Trip-and-fall accidents are serious, and fixing the problem now protects you, your family, and visitors.

The bottom line? Your sunken driveway doesn't have to be stressful or massively expensive. Poly foam lifting in Jackson MS offers a smart, modern solution that gets your driveway level fast, affordably, and with lasting results. Schedule an inspection today at 601-405-1052.